Category: News

Elvee Energy Training: 8th to 12th June 2026 from 7.00pm to 9.00pm daily on Zoom (WAT / UTC + 1)

Pore pressure related operational well safety and positive petroleum results are the most important goals in the oil and gas industry. Personnel who are not skilled in formation evaluation, pore pressure monitoring and well follow up, are not considered essential operational staff. Those who are, build a formidable career in this in-depth task, and continually optimize operational efficiency. This training is for candidates seeking to meet these goals. Skills to be acquired during the training are:

PRESSURE BASICS AND UNITS
* Fluid Gradients and Pressure-Depth Plot
* Fluid Pressure and Lithostatic Stress
* Drilling Hazards: Kick and Blowout
* Causes and Timing of Overpressure / The Centroid Concept
* Pressure Dimensions and Units
* Pressure Compartmentalization Implication in Oil & Gas Fields

PORE PRESSURE & FRACTURE GRADIENT PREDICTION
* Hydrostatic, Principal Stresses and Overburden Curves
* Stress Tests: FIT / LOT and Application in Drilling
* Disequilibrium Compaction and Inefficient Dewatering
* Pore Pressure Prediction: Eaton and Terzaghi Equations
* Equivalent Depth and Ratio Methods and Realtime
* Psh & Psand: Pressure Computation & Measurement

PORE PRESSURE PREDICTION USING INDUSTRY SOFTWARE
* Setting Up a New Pore Pressure Prediction Project
* Importing Data from LAS File or Creating a New Dataset
* Picking and Projecting Shale Points on the Lithology Logs – GR
* Building the Overburden Gradient (OBG) and Normal Compaction Trend (NCT)
* Performing the Pore Pressure Prediction and Fracture Gradient (S3) Analysis
* Application to Drilling and Real-time Well Follow Up

Fee: N60,000 (including certification)
With options for software installation, inhouse coaching and job openings

To participate, follow instruction on the flyer to register before Friday 5th June 2026.
For more enquiries, whatsapp: +2349080278616 or call +2347037628734.

Special Skills Development Program
@ Elvee Training Centre, Enugu.

LEVEL 1 – BEGINNER
* Introduction to Smart Systems Technology
* Fundamentals of Satellite TV Installation
* Satellite Dish Alignment & Signal Tracking
* CCTV Camera Systems & Applications
* CCTV Cabling and Basic Networking
* Smart Security Camera Installation
* Solar-Powered CCTV Systems
* Starlink Internet Installation Basics
* Installation Tools, Materials & Equipment
* Troubleshooting, Testing & Maintenance
* Safety Procedures & Professional Practice

LEVEL 2 – ADVANCED
* Satellite Dish Mounting Techniques
* LNB Skewing and Advanced Signal Tracking
* Coaxial and Ethernet Cable Routing
* Decoder Setup and Configuration
* Basic Electrical and Measurement Skills
* Dish Alignment, Elevation & Signal Optimization
* Proper F-Type Connector Termination & Weatherproofing
* Use of Signal Meters and Signal Interpretation
* DStv Manual Setup & Installation Wizard
* Smart LNB Setup and Configuration
* Fault Diagnosis and System Maintenance
* Outdoor Practical Sessions, Case Studies & Field Exposure

To register, whatsapp +2349080278616 or Call +2347037628734.

Special Skills Development Program
@ Elvee Training Centre Enugu

Module 1: Introduction to Computer Hardware
• Understanding Computer Systems
• Types of Computers and Devices
• Internal vs External Hardware Components

Module 2: Safety & Technician Tools
• ESD and Electrical Safety
• Basic Hardware Repair Tools
• Workspace Preparation and Best Practices

Module 3: Computer Components
• Motherboard and Chipset
• CPU and Cooling System
• RAM and Storage Devices (HDD/SSD)
• Power Supply Unit (PSU)

Module 4: Assembly & Disassembly
• System Unit Disassembly
• Installing and Replacing Components
• Cable Connections and Management

Module 5: Peripheral Devices
• Keyboard, Mouse, and Monitor Setup
• Printers and External Devices
• Ports, Connectors, and Adapters

Module 6: Operating System & Drivers
• Installing Operating Systems
• Driver Installation and Updates
• BIOS/UEFI Basics

Module 7: Troubleshooting & Maintenance
• Diagnosing Hardware Problems
• POST and Beep Codes
• Preventive Maintenance and Cleaning
• Data Backup and System Optimization

Module 8: Networking Basics
• LAN and Internet Connections
• Routers, Switches, and Wi‑Fi Setup
• Network Troubleshooting Basics

Final Practical & Assessment
• Complete PC Build Exercise
• Fault Diagnosis Test
• Hardware Maintenance Assessment.

To register, whatsapp +2349080278616 or Call +2347037628734.

Special Skills Development Program
@ Elvee Training Centre Enugu

Module 1: Introduction to Computer Networking
• Role of Computer Networks in Business, Education, and Daily Life
• Introduction to LAN, WAN, and MAN
• Characteristics of Local Area Networks (LAN)

Module 2: Network Models & Devices
• The Seven Layers of the OSI Model
• The Four Layers of the TCP/IP Model
• Functions of Routers, Switches, and Modems
• Role of Network Interface Cards (NIC)

Module 3: Networking Components
• Differences Between Hubs, Switches, and Routers
• Functions of End Devices
• Functions of Intermediary Devices

Module 4: Data Transmission & Protocols
• Concept of Network Packets
• Bandwidth and Throughput
• Purpose of Networking Protocols
• Function of TCP/IP in Reliable Data Transmission

Module 5: Network Topologies
• Importance of Network Topology
• Star, Bus, Ring, and Mesh Topologies
• Differences Between Network Topologies

Module 6: Network Media & Cabling
• Types of Network Media
• Electrical, Optical, and Wireless Media
• Coaxial, UTP, and STP Cables

Module 7: Network Design & Infrastructure
• Importance of Network Design
• Network Design Tools
• The Hierarchical Model
• Core, Distribution, and Access Layers

Module 8: SOHO & Home Networking
• Components of SOHO
• Home Router Configuration
• Basic Home Network Setup

Module 9: Network Simulation & Practical
• Introduction to Packet Tracer
• Network Simulation Exercises
• Basic Troubleshooting Techniques

Final Practical & Assessment
• Network Design Exercise
• Cable Crimping and Configuration
• Network Troubleshooting Assessment

To register, whatsapp +2349080278616 or Call +2347037628734.

Elvee Energy Training: 1st to 5th June, 2026 / 3.30pm to 5.30pm (WAT/ UTC+1) daily on Zoom

Drilling Fluids and Mud Engineering training is an opportunity to acquire skills in an encompassing job operation, and participate in a promising work unit where personnel supervise and follow the well in real-time. Skills to be covered during this training are:

DRILLING FLUIDS AND HOLE CONDITIONS
* Types of Drilling Fluid: Water-based, Oil-based, Synthetic-based, Functions of Drilling Fluids
* Composition of Drilling Fluids, Mud Properties, Viscosifiers, LCM/Additives and Gel Strength
* Drill Cuttings, Lag time Calculations, Laboratory Tests, Filtrates
* Siliceous, Argillaceous Rocks/Swelling Clays and Carbonates, Evaporites and Organics
* Hole Conditions, Underbal. Drilling, Cavings; Bit Balling, Dope, Shavings, Contaminants

MUD ENGINEERING AND FIELD CASE STUDIES
* Introduction to Mud Engineering – Role of a Mud Engineer, Job Specifications & Scope
* Hydraulics, Rheology, Mud Mixing Excercises, Density Determination, Drilling Fluids Testing / Equipments
* Fluid System Preparation and Selection Criteria – Mud Program Design, Fluid Laboratory
* HSE and Environmental Considerations, Hazards and Risks – Mud Disposal Methods
* Case Studies – Examples of Mud Engineering Projects in Challenging Well Scenarios.

Discounted Fee: 30k / $30

To participate, register before Monday, 1st June 2026. For more enquiries, whatsapp: +2349080278616 or call +2347037628734.

Are you short on time for scheduled classes or prefer to learn at your own pace?
The ELVEE Learning Management System (LMS) gives you the flexibility to learn anytime, anywhere.
✔ Access all course slides and training materials anytime — with no limits
✔ Learn at your convenience and revisit lessons whenever you need
✔ Earn certificates in:
Geosciences & Engineering
Digital Technology
Agrotech
Green Tech
Take control of your learning journey today.

👉 Enroll now:
https://lnkd.in/gwh3Eg3N

Take your career to the next level!

For enquiries: whatsapp +2349080278616 or call +2347037628734

Physical and Zoom Classes: afternoon and evening daily

– 2 to 5pm Physical at Elvee Training Centre
– 7 to 9pm Virtual on Zoom daily

Schedule: 13th to 30th April 2026

Why this training matters

In today’s workplace, professionals across all disciplines are expected to understand automation and digital technologies. Many geoscientists and engineers are just realizing that without these skills, they risk falling behind. The good news: it’s not too late to start.

Join Elvee Digitech Training for a practical, hands-on program in Python coding for AI, Machine Learning (ML), and Automation.

If you want to expand your skillset, stay competitive, and apply modern tools to real-world tasks, this training is your opportunity.

Training Levels & Skills Covered

WEEK 1: PYTHON FUNDAMENTALS & GETTING STARTED WITH AI/ML
* Installing Python (Anaconda)
* Using IDEs: Jupyter Notebook and VS Code
* Python Basics: Syntax, Modules, Libraries, and Visualization (intro to: Matplotlib, Seaborn, and Pandas)
* Exploratory Data Analysis (EDA) and Data Analysis Case Studies
* Fundamentals of Artificial Intelligence & Machine Learning

WEEK 2 INTERMEDIATE: MACHINE LEARNING & AUTOMATION
* Data Handling with Pandas (Data Frames), NumPy (Arrays), Matplotlib (visualization).
* Supervised Learning (Scikit-Learn)
* Regression & Classification Basics
* Implementing Linear & Logistic Regression Models from Scratch with NumPy
* Ensemble Methods: Decision Trees, Random Forest

WEEK 3 PROJECT AND CASE STUDIES

– Fees: 60k

This training is designed to take you from zero to standard skills levels in Python, Artificial Intelligence and Machine Learning.

To register, whatsapp: +2349080278616 or Call +2347037628734.

ELVEE-ECOMAHN is proud to be a sponsor at the ongoing SPE Well Intervention Summit in Port Harcourt.

Join us as we explore the future of energy and well intervention, showcasing AI/ML-driven engineering solutions while driving conversations around innovation, sustainability, and resilience in Nigeria’s evolving energy landscape.

We are excited to represent ELVEE-ECOMAHN, highlighting cutting-edge solutions such as the D2 Oil Tools Floating Drift—designed for precision-driven well intervention—and engaging with industry leaders shaping the next phase of oil and gas field optimisation.

Let’s connect, collaborate, and build the future of energy together.

To reach us:
WhatsApp: +234 908 027 8616
Call: +234 703 762 8734

8th to 29th April 2026

(Delivery method: Physical & Virtual Class Options)

PHYSICAL – Monday, Wednesday, Friday

VIRTUAL – Tuesday, Thursday and Saturdays

Venue for Physical Training: Elvee Training Centre, Centenary Road, Enugu.

Week 1: ROBOTICS FOR BEGINNERS
· Introduction to Robotics
· Robot Architecture and Functions
· Types of Robots and their Designs
· Introduction to Microcontrollers
· Types of Microcontrollers
· Hands-on PRACTICALS with Robotic Chassis

Week 2: INTERMEDIATE ROBOTICS AND SENSORS
· Introduction to Sensors
· Robotics Sensors and Their Functions
· Object Avoidance Using Sensors
· Infrared Sensor(IR) and Line Following Robot
· Hands-on PRACTICALS on E&P Industry ROV

Week 3: ADVANCED ROBOTICS WITH ARDUINO
· Introduction to Arduino
· Arduino IDE Software and Its Features
· Arduino Parts and Functions
· Introduction to Servo Motors
· Types of Servos and Its Programming.
· Humanoid Robotics and Arduino
· Hands-on PRACTICALS and Humanoid Building PROJECT

Discounted Price: N60,000 (instead of 120k)

To register, whatsapp: +2349080278616 or Call +2347037628734.